BDTSM - DRY CLEANING SOLVENT,P-D-680

  • MSDS: BDTSM
  • Manufacturer: OCTAGON PROCESS INC
  • Product Name: DRY CLEANING SOLVENT,P-D-680
  • National Stock Number: 6850-00-285-8012
Product Identification

Product ID:DRY CLEANING SOLVENT,P-D-680
MSDS Date:01/01/1987
FSC:6850
NIIN:00-285-8012
MSDS Number: BDTSM

Responsible Party
OCTAGON PROCESS INC.
596 RIVER ROAD
EDGEWATER, NJ 07020-1105
US

Emergency Phone: 201-945-9400

Info Phone: 201-945-9400

Cage: 82925

Contractor
OCTAGON PROCESS INC.
EDGEWATER, NJ 07020 US

Telephone: 201-945-9400

Cage: 82925

Ingredients

STODDARD SOLVENT

CAS: 8052-41-3

RTECS: WJ8925000

Fraction By Weight: 100%

OSHA PEL 500 PPM

ACGIH TLV: 100 PPM; 9293

Hazards

Effects of Overexposure:ANESTHESIA,HEADACHE,NAUSEA,DIZZINESS,ETC.
IRRITATING TO SKIN & EYES.

First Aid

First Aid:INHAL-GET TO FRESH AIR. EYES-FLOOD W/WATER;SEEK MED ASSIST.
SKIN-WASH W/MILD SOAP & WATER. INGEST-CALL DOC. REMOVE ALL CONTAM
CLOTHING & WASH BEFORE REUSE.

Fire Fighting

Flash Point:113F/45C/TCC
Lower Limits:1.0
Upper Limits:6.0
Extinguishing Media:FOAM,CARBON DIOXIDE,DRY CHEM,WATER-FOG,STEAM
Fire Fighting Procedures:DO NOT USE WATER. EXCLUDE AIR. CONSULT LOCAL
FIRE MARSHALL
Unusual Fire/Explosion Hazard:HANDLE AS A COMBUSTIBLE MATL.

Accidental Release

Spill Release Procedures:FLUSH W/WATER INTO RETAINING AREA OR
CONTAINER. AVOID SPARKS,FIRE OR HOT METAL. SML QTY MAY BE ABSORBED
ONTO APPROPRIATE ABSORBENT.

Handling

Handling and Storage Precautions:STORE IN COOL PLACE AWAY FROM SOURCES
OF IGNITION. USE ONLY W/ADEQUATE VENT. AVOID PROLONGED OR REPEATED
BREATH OF VAPORS & CONTACT.
Other Precautions:HANDLE AS A COMBUSTIBLE MATL.

Exposure Controls

Respiratory Protection:ABOVE TLV-USE CARTRIDGE RESPIRATOR OR GAS MASK.
Ventilation:LOCAL EXH OR MECHAN W/APPRVD CLASS D EXPLOS-PROOF
MOTOR,SWIT
Protective Gloves:IMPERMEABLE
Eye Protection:CHEM GOGGLES
Other Protective Equipment:APRON,SKIN BARRIER CREAM
Supplemental Safety and Health
P-D-680,TYPE I. MSDS NOT DTD.

Chemical Properties

HCC:F4
Boiling Pt:B.P. Text:323F-390F
Vapor Pres:5
Vapor Density:4.8
Spec Gravity:0.786
Evaporation Rate & Reference:0.08(N-BUT ACET=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:LIGHT COLORED LIQUID W/CHARAC HYDROCARBON ODOR
Percent Volatiles by Volume:100

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING MATLS.
Stability Condition to Avoid:HIGH IGNIT SOURCES,OPEN FLAME,SPARKS,ETC.
Hazardous Decomposition Products:CARBON MONOXIDE & CARBON DIOXIDE

Disposal

Waste Disposal Methods:INCINERATE UNDER SAFE CONDITIONS OR DISPOSE OF
IAW LOCAL,STATE & FED. REGS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.